Large Burnoff OvenDC Generator RepairSmall AC Motor RepairLaser Shaft AlignmentNew Equipment SalesLarge Electric Motor WarehouseOn-Site Motor BalancingVibration Analysis
$('#s6').cycle({
fx:    'fade',
delay: -4000
});

Foot Mounted AC
Motor Frame Dimensions

Enter the frame designation for the resulting dimensions

Frame Dimension a
Frame Dimensions B
Enter Frame Designation
 
   
 

Notes:

  • All dimensions are in inches
  • It is recommended that all machines with keyseats cut in the shaft extension for pully, coupling, pinion, and so forth, be furnished with a key unless otherwise specified by the purchaser
  • Frames 42 to 56H, inclusive: if the shaft extension length of the motor is not suitable for the application, it is recommended that deviations from this length be in 0.25-inch increments.
  • **All weights are approximate and will vary by manufacturer
  • *The tolerance on the D dimension for rigid base motors shall be +0.00 inch, -0.06 inch. No tolerance has been established for the D dimension of reslilient mounted motors.
  • †Frames 42 to 56H, inclusive - the tolerance for the 2E and 2F dimensions shall be +/- 0.03 inch.